Item Number:300465

The mud machine is mainly used to evenly mix clay and other raw materials to make mud suitable for the production of pottery products

The use of clay drilling machine not only improves the efficiency of pottery, ensures the quality of pottery, but also reduces manual labor, for pottery enthusiasts, the operation of clay drilling machine is simple, and it can easily produce a variety of shapes of pottery.
In addition, the mud machine is also suitable for other fields, such as the production of standardized concrete to ensure the quality and strength of concrete.

Product parameter:
Voltage: 220V
Power:1.5KW
mud production:150 kilos an hour
mud outlet diameter :60mm
Main dimensions weight: 30.3*18.1*36.6 83KG

Function introduction：
1, safe, light weight, greatly reducing the noise of the machine
2, the use of inverter drive motor, high efficiency and low energy consumption, is conducive to reducing production costs
3, the mud cylinder can be detachable structure, easy to clean up the mud in the mud cylinder

Installation environment requirements：
1. The equipment should be placed on a cool, ventilated, dry, dustproof and good level ground;
2. The user must install the wiring according to the safety standard of electricity consumption. Single-phase and three-phase power must be supplied by a power grid with ground wires. The device can be put into operation only when there is a grounding cable. Do not run the device without a grounding cable. Single-phase AC220V±10%;
3. Ambient temperature 0 ~ 50 degrees Celsius, no corrosive and no strong electromagnetic field radiation occasions;
4. The working area of the equipment should maintain air circulation to avoid overheating and burning the motor.
5. Arrange power cables and sockets correctly;
6. Do not place any items on the machine itself;

Operation procedure：
Operation process: installation check (accessories check, power-on test machine check) → Power on → switch on the mud mill → mud input → initial training → refining extrusion → Get dense plastic mud from the discharge port → Stop feeding → Turn off the mud mill switch → Turn off the power → Clean the equipment

Operation instructions and precautions：

Power on
First open the mud machine and then evenly put the mud into the bucket, and pump the mud together to pump out the bubbles in the mud.

Shut down
The shutdown steps are as follows:
1, there is no mud inside the mud machine bucket and the mud mouth does not produce mud
2. Open the air valve to exhaust
3. Stop the mud machine
4. Take a wet cloth and put it in the bucket to keep the moisture in the mud
5. Use plastic bags to seal the bucket and mud nozzle.

Note：
1, dry mud can not be put into the bucket, recycling mud can not have garbage and debris.
2, the mud is not used for a long time, it should be started every half a month.
3, do not put debris, or hand into the mud mouth, to avoid accidents!

Item Number:300465


Notice
1.Limited stock, please purchase ASAP if you want it.
2.Before pickup, please call us to make sure.
3.The price will be adjusted when there's large fluctuations in exchange rates and raw material costs.
4.Advertising price does not include the tax.
-
Warehouse Address:
2220 Midland Ave., Unit 60AP (Administration Park)
Scarborough, ON M1P3E6

Business Hours:
Monday - Friday 9:00am - 4:30pm
Saturday & Sunday Closed
* For PICK UP, appointment by phone needed.
Tel: (647)350-2889/(416)727-3877
http://www.asc365.com/