-

Item number: 021488



300*180 Small Hammer Stone Crusher Broken Coal Testing Equipment 220V 3KW 200-400kg/h 021488

-

The hammer crusher is a kind of equipment that crushes materials by impact. Hammer crushers are suitable for crushing medium-hard materials in industrial sectors such as cement, chemical engineering, power,and metallurgy, including limestone, slag, coke, coal, and other materials for medium and fine crushing operations.



Parameter

Voltage:220V

Power:3KW

Discharged grain size:3mm,6mm,10mm

Fed Particle Size:<80 mm

Productivity:200-400 kg / h



Features

1. The material is cut, milled, broken and sleeved smoothly, and the machine is widely used.

2. Fully sealed design, no dust pollution, meeting environmental requirements.

3. The sample with large moisture content can be broken, no loss of moisture exists in the breaking process,and performance is stable.

4. The material size is uniform, the sample preparation speed is high, the production efficiency is high, and work is reliable.

5. The machine is reasonable in whole structure, attractive in appearance, flexible to adjust and easy to operate, maintain and clean.

6. Transmission parts are equipped with protective facilities, achieve smooth operation and low noise and meet safety requirements.



Advantage

1. Widely used

Applicable to coal, electricity, scientific research and other industries and sectors, coal, ore, rock or non-metallic substances with medium hardness and brittle metal substances



2. Sample uniformity

The sample size is uniform, and the speed is high.



3. High production efficiency

Prepared samples without being screened can also be used directly, less process, high production efficiency



4. No dust pollution

Crushing sealing design, no dust pollution



5. Smooth operation

Balanced running, low noise, meeting safety requirements



Usage method

1. After receiving the goods, check whether the machine packaging is intact and remove any abnormal

situations that may occur during transportation.



2. Fix the body horizontally and firmly on a solid ground to reduce vibration and noise.



3. The machine needs to be connected to the air switch. After turning on the power, rotate the emergency stop switch to ensure normal operation of the machine and ensure that the motor direction is consistent with the arrow mark of the crusher.



4.Start the motor for a few minutes and load the material into the hopper. Equipment into the normal operation phase, should pay close attention to whether the abnormal, if abnormal must immediately stop inspection, remove the exception. After the preparation of the sample, should continue to use the machine running for a minute, and then stop cleaning equipment, remove sieve block and debris.



Scope of application

Applicable to coal, electricity, chemicals, building materials, geological exploration and medicine, teaching and research industries and sectors.Dry or contain less than 20% moisture in coal, ore, rock or other medium hardness material.



Note:

1.This machine has no plug and needs to be connected to the air switch for use by the customer

(we have a video of the wiring, if you can't wire it, you can contact us for a video reference).



2.When using the machine, preventive measures must be taken. During machine operation,hands, clothing, and tools should be kept away from moving parts to avoid touching them with hands and prevent harm to the human body.



After working for about 2 hours, let the motor rest and cool down before continuing to use it.





Item include: 021488

1 set of 300*180 Small Hammer Crusher Broken Coal Testing Equipment 220V



Notice

1.Limited stock, please purchase ASAP if you want it.

2.Before pickup, please call us to make sure.

3.The price will be adjusted when there's large fluctuations in exchange rates and raw material costs.

4.Advertising price does not include the tax.



Warehouse Address:

2220 Midland Ave., Unit 60AP (Administration Park)

Scarborough, ON M1P3E6



Business Hours:

Monday - Friday 9:00am - 4:30pm

Saturday & Sunday Closed

* For PICK UP, appointment by phone needed.

Tel: 647-350-2889 416-727-3877



http://asc365.com/newproductdetail.asp?productid=021488&typeid=2102