Item number: 238007

Concrete Floor Grinding and Trimming Machine with 3 Grinding Discs Foldable Arm Design Hand Push Dustless Polishing Sanding Machine 238007
-
Note: The ground polishing machine cannot polish the ground where glue exists.

Features
1. The pure copper motor is of high quality and the product is sturdy and durable.
The new statorand rotor of the motor can easily realize the conversion of electrical
energy and mechanical energy.

2.High quality round grinding head, hard, wear-resistant, work efficiency and high quality.

3.High performance, stable life, long service life.

4.Highly adaptable cement floors can also be fully hardened and work can be done at the root of the wall,adjustable position of chassis.

Parameter
Voltage 220V
Power 3KW
Phase number 1
Working width 330mm
Rotational speed 1440r/min
Number of grinding heads 3pcs
Work Depth 0-3mm

Details
It can be disassembled and used against the wall.
Rubber damping wheel, running more smoothly.
The arms are foldable and can be adjusted to a suitable height when in use, and are easy to carry.
Aviation plug, safe to use, fast and efficient connection.
Lifting hand wheel to control the chassis when the ground is uneven.
The grinding chassis can be adjusted in 4 positions for flexible use.

Give away 5 meters of wires. The maximum length of the wire connected to the machine can be 90 meters. The specification is three-core wires. Each wire should not be less
than 6 mm ² of pure copper wire. The wire must be connected to the air switch, and the rated current of the air switch is about 63A. As shown in the picture of wiring mode, please contact us if you have any questions.

Precautions for use

1. The input voltage should not be too low.

2. When using, first lift the machine head off the ground,and then turn on the
switch. When the machine head rotates normally, gently place it on the ground.

3. When working, the machine head swings left and right, then moves forward,
and cannot stop in place.

4. In case of power failure during operation, the switch should be reset and cannot
be stopped at the original position to avoid burning the motor when the power is
on.

5.If a generator is used to provide power, the output power of the generator must
be at least 9KW.

Item Included: 238007
1*Floor Grinding And Trimming Machine 220V





Notice
1.Limited stock, please purchase ASAP if you want it.
2.Before pickup, please call us to make sure.
3.The price will be adjusted when there's large fluctuations in exchange rates and raw material costs.
4.Advertising price does not include the tax.

Warehouse Address:
2220 Midland Ave., Unit 60AP (Administration Park)
Scarborough, ON M1P3E6

Business Hours:
Monday - Friday 9:00am - 4:30pm
Saturday & Sunday Closed
* For PICK UP, appointment by phone needed.
Tel: 647-350-2889 416-727-3877

https://asc365.com/